About Us

KEY WORDS

Intelligent metrology, Design, GPS, Accuracy, Quality, Production Efficiency.

ABSTRACT

Adequate knowledge in the areas of intelligent metrology and design are important presuppositions to achieve waste free production and low costs of manufacturing and accuracy at the same time within the sophisticated production systems. This is of extreme importance in present time of worldwide international competition in industry and production engineering and at the same time increasingly higher costs of energy and raw material. The prescription and consumption of material and energy to achieve the necessary and required workpiece accuracy in series manufacturing depends to a great extent from the (geometrical) workpiece tolerances of any kind (roughness, form, positional, dimensional) which are prescribed for the production and the fulfillment of these tolerances and therefore for the function of the produced workpieces and their fitness for practical application and none the less of the economy of production altogether. This requirement is of great importance at the time being which is characterized as described above.

CITATION INFORMATION

Acta Mechanica Slovaca. Volume 15, Issue 1, Pages 6 – 11, ISSN 1335-2393

DOWNLOAD

  Intelligent Design and Metrology for Higher Quality, Accuracy and Improving Production Efficiency

REFERENCES

[1] Osanna, P. H., Durakbasa, M.N., Kräuter, L., 2008, “Industrial Metrology and Interchangeable Manufacturing under the Viewpoint of Nanotechnology and Nanometrology”, Bulgarian Academy of Sciences, Problems of Engineering Cybernetics and Robotics, Vol. 59, pp.60-73

[2] D. Whitehouse, “Comparison between stylus and optical methods for measuring surfaces”, Annals CIRP, 37(2), pp. 649-653, 1988

[3] ISO 4287 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997+Cor 1:1998+Cor 2:2005+Amd1:2009)
[4] EN ISO 1101-2006: Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Tolerances of Form, Orientation, Location and Run-out; EN ISO 1101/A1: 2010 Geometrical Product Specifications (GPS) - Geometrical tolerancing-Tolerances of form, orientation, location and run-out- Amendment 1: Representation of specifications in the form of a 3D model
[5] ISO 8015 - 2011: Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules
[6] EN/ISO 9001 - 2008: Quality Management Systems - Requirements. 2008-12
[7] EN/ISO 14001 - 2009: Environmental management systems - Requirements with guidance for use (ISO 14001:2004 + Cor. 1:2009)
[8] EN/ISO 9004 - 2009: Managing for the sustained success of an organization - A quality management approach
[9] ISO/TR 14638: Geometrical product specification (GPS) - Masterplan
[10] ISO/TR 10360-1-1993, Part 1: Coordinate Metrology - Part 1: Definitions. Applications of the Fundamental Geometrical Principals. 1993
[11] P.H. Osanna, N.M. Durakbasa e.a.: Global Competitive Manufacturing on the Basis of Intelligent Metrology and Quality Management as Important Tools. Proceedings of the International Symposium “Tools and Methods of Competitive Engineering - TMCE’2002” (Editor:Horvath, I. e.a.), Wuhan, China, April 2002, ISBN 7-5609-2682-7, 837/844

Latest Issue

ams 2 2016

Download

Guests Online

We have 18 guests and no members online